Mission-Critical Industrial Filtration & Nanofiber Engineering

Power Generation & Steel Turbomachinery

Heavy turbomachinery inlet air filtration, blast furnace blower protection, and high-temperature waste heat recovery filtration.

5 Application Areas
100% Linked Solutions
ISO 16890 & EN 1822 Tested
DIN 53438 F1 Fire-Class Rated

Engineering Overview & Domain Challenges

Thermal power plants, combined-cycle gas turbine (CCGT) stations, and integrated steelworks operate continuously under extreme atmospheric particulate burdens. Mill scale, coke dust, ambient desert silica, and cooling tower drift cause compressor erosion and heat-rate degradation. Our rugged multi-stage filtration solutions maintain MW output and avoid costly unscheduled plant shutdowns.

✓ Targeted Sub-Micron Particulate Capture
✓ Continuous Fan Energy Savings & Low ΔP
✓ Certified Extended Service Life

Top 5 Application Areas & Certified Filtration Solutions

01

Gas Turbine Filter House Heavy Pre-Filtration (V94.2 & Frame 9)

Siemens V94.2 and GE Frame 9 gas turbines installed across Iran's desert power stations face massive seasonal sandstorms that quickly clog standard panel filters.

Recommended Nanofiber / Filter Solution Engineering Purpose Operational & Performance Benefits
Rigid Pocket Filters PPL (G4) + Pleated Heavy Pre-Filters
Stage 1 and 2 air intake protection capturing high dust mass with low energy drop
Aerodynamic pocket design eliminates vibration fatigue; DHC >3900 g synthetic dust per 595x595 mm cell.
02

Blast Furnace Cold Blast Blower Intake Filtration

Axial and centrifugal blast furnace blowers supply hot blast stoves with thousands of cubic meters of air, where graphite and coke dust cause impeller erosion.

Recommended Nanofiber / Filter Solution Engineering Purpose Operational & Performance Benefits
Washable Metallic Panel Filters + V-Cell Compact Filters (F8)
High airflow dust separation protecting multi-megawatt axial blower impellers
Washable metal pre-filter reduces consumable operating costs; V-cell stage ensures ISO ePM1 >75%.
03

Combined-Cycle High-Efficiency Secondary HEPA Retrofit

Power plant operators seeking to eliminate online and offline compressor water washes by upgrading final filter stages to E10–E12 EPA ratings.

Recommended Nanofiber / Filter Solution Engineering Purpose Operational & Performance Benefits
High Capacity V-Type HEPA Filters (E10–E12)
Terminal turbine intake filtration achieving zero sub-micron fouling on compressor blades
Eliminates compressor degradation; maintains constant power output and avoids 3–5% heat rate loss.
04

Steel Rolling Mill Electrical Substation Pressurization

High-voltage switchgear rooms located near hot rolling stands are exposed to conductive iron oxide scale dust that causes catastrophic electrical arcing.

Recommended Nanofiber / Filter Solution Engineering Purpose Operational & Performance Benefits
Fine Pocket Filters F7/F8 with Galvanized Steel Frames
Pressurization filtration ensuring zero conductive metallic particulate ingress into electrical rooms
Meets NFPA and electrical substation cleanliness standards; flame resistant media prevents fire spread.
05

Nanofiber Upgraded Pulse-Jet Cartridges for Turbine Intakes

Self-cleaning pulse-jet filter houses in desert environments require cartridge media that releases cake during pulsing without embedding sub-micron dust.

Recommended Nanofiber / Filter Solution Engineering Purpose Operational & Performance Benefits
Sample 04 Nanofiber-Coated Cartridge Media (SRV-02)
Surface filtration preventing deep bed clogging and reducing compressed air pulse frequency
Increases pulse cleaning recovery efficiency by 70%; extends cartridge service life beyond 16,000 hours.

Technical Standards & Laboratory Verification

All commercial filter models and electrospun nanofiber media comply with international air cleanliness and efficiency standards:

ISO 16890: Fractional efficiency testing against PM1, PM2.5, and PM10 particles.
EN 1822 / ISO 29463: Individual oil-thread & optical scanning at Most Penetrating Particle Size (MPPS).
DIN 53438-F1: Self-extinguishing flammability certification for industrial heating & paint curing ovens.
DIN CERTCO R0: Zero particulate migration (>10 µm) validation for automotive finishing lines.
INTERNATIONAL CLASSIFICATION STANDARDS

Air Filtration & Suspended Matter Standards Matrix

Comprehensive cross-reference comparing legacy EN 779:2012, ASHRAE 52.2, modern ISO 16890 fractional PM ratings, and high-efficiency cleanroom HEPA/ULPA EN 1822 standards.

Group EN 779:2012 ASHRAE 52.2 Arrestance (Am %) Efficiency (Em %) Min. Eff. 0.4µm ISO 16890 ePM1 ISO 16890 ePM2.5 ISO 16890 ePM10 ISO Coarse Final ΔP (Pa)
COARSE G1 MERV 1 50 ≤ Am < 65 — — — — — — 250 Pa
COARSE G2 MERV 2-4 65 ≤ Am < 80 — — — — — > 30% 250 Pa
COARSE G3 MERV 5-6 80 ≤ Am < 90 — — — — — > 40% 250 Pa
COARSE G4 MERV 7-8 90 ≤ Am — — — — — > 60% 250 Pa
MEDIUM M5 MERV 9-10 — 40 ≤ Em < 60 — — — > 50% — 450 Pa
MEDIUM M6 MERV 11-12 — 60 ≤ Em < 80 — — 50-65% > 60% — 450 Pa
FINE F7 MERV 13 — 80 ≤ Em < 90 35% 50-65% 65-80% > 85% — 450 Pa
FINE F8 MERV 14 — 90 ≤ Em < 95 55% 65-80% > 80% > 90% — 450 Pa
FINE F9 MERV 15 — 95 ≤ Em 70% > 80% > 95% > 95% — 450 Pa

* Note: Since 2018, ISO 16890 fully supersedes EN 779:2012. Discharge treatment using IPA vapor is mandatory to evaluate uncharged electrostatic media.