Skip to main content
+98 912 322 0721 info@aryannano.com Tehran & Isfahan (IUT Campus)
AN
Nano Sazeh Aryan Nik & Vira Safi Roll-to-Roll Electrospinning & Cleanroom Air Filtration
Roll-to-Roll Industrial Electrospinning & Certified Air Filtration

Pioneering Industrial Nanofiber Production & Turnkey Air Filtration Solutions

Combining 3 continuous Roll-to-Roll electrospinning lines with 18 commercial filter families. Certified under ISO 16890, EN 1822, and DIN 53438-F1.

3 Industrial R2R Lines 200 m/h Max Capacity 80–500 nm Nanofiber Diameter ISO 16890 / EN 1822 Certified
Explore Products & SKUs
Industrial Roll-to-Roll Electrospinning Line Production View
Isfahan University of Technology (IUT) Facility Continuous Nanofiber Roll Deposition (60 cm Width)

Industrial Roll-to-Roll Electrospinning

3 production lines with capacity up to 200 m/h and 60 cm roll width, engineered for continuous nanoscale deposition (80–500 nm).

Turnkey Air Filtration Engineering

Over 145 dimensional SKUs spanning Pre-Filters (G2–G4), Fine Media (M5–F9), and Absolute HEPA/ULPA (E10–U17) certified to ISO 16890 and EN 1822.

Custom Substrate & Process Development

Application of functional nanofiber veils onto customer nonwovens, cellulose papers, and reticulated open-cell foam pads via PLC automation.

3
Roll-to-Roll Lines
2
Solution Lines
200 m/h
Combined Capacity
60 cm
Substrate Width
80–500 nm
Nanofiber Diameter
145+
Standardized SKUs
HIGH-RESOLUTION CHARACTERIZATION

Scanning Electron Microscopy (SEM) & Nanoscale Quality Assurance

Every electrospun nanofiber lot is empirically verified via scanning electron microscopy at the Isfahan University of Technology (IUT) central laboratories. We maintain strict control over average fiber diameters (80–500 nm), pore size distribution, and layer homogeneity to ensure high particulate interception with ultra-low pressure drop.

10,000× (1 µm scale)
SEM Micrograph View of Electrospun Nanofibers
INDUSTRIAL SCALE-UP METHODOLOGY

5-Stage Engineering Project Workflow: From Lab to Mass Production

Our systematic development roadmap ensures seamless transition from initial substrate evaluation to high-volume continuous Roll-to-Roll production.

01

Requirement Analysis

Evaluating target filtration specs, operating temperature, air volume, and substrate properties.

02

Sample & Process Development

Formulation of polymer-solvent systems and preliminary electrospinning deposition trials.

03

Technical Evaluation

SEM micrograph characterization (up to 10,000×), pressure drop verification, and arrestance testing.

04

Process Optimization

Fine-tuning PLC drum rotation, substrate line speed, tension, and coating weight.

05

Scale-Up / Production

Continuous Roll-to-Roll manufacturing across 3 electrospinning lines up to 200 m/h capacity.

FUNCTIONAL PERFORMANCE SPOTLIGHT

Spotlight: Sample 04 Automotive Filter Paper Nanofiber Coating

Visualizing the dramatic transformation of conventional porous cellulose/synthetic filter media when coated with a high-porosity electrospun nanofiber veil. Intercepts sub-micron particulate without increasing initial airflow resistance.

Conventional Uncoated Cellulose Media Conventional Uncoated Paper Media
Nanofiber Veil Coated Filter Media Electrospun Nanofiber Veil Coated
PARAMETRIC ENGINEERING CATALOG

Standardized Filter Models & Electrospun Nanofiber Samples

Explore over 145 dimensional SKUs certified to ISO 16890, EN 1822, and ASHRAE 52.2 standards across 18 commercial filter families.

Sample 01 Thermal Insulation
80–500 nm

Sample 01: Thermal Insulation Nanofiber Material

Super-insulating nanofibrous matrix with low thermal conductivity (0.024–0.032 W/m·K) engineered for technical garments and aerospace shielding.

Sample 02 Wound Dressing
Medical / Biocompatible

Sample 02: Advanced Nanofibrous Wound Dressing

Engineered in B2B partnership with Kimia Zist Tarmim Co. featuring sustained drug release kinetics and high moisture vapor transmission rate (MVTR).

FF-560 GX Ceiling Media
ISO ePM10 50% • R0

Diffusion Media FF-560 GX (Class M5 / R0)

Progressively structured synthetic fibers with full adhesive impregnation and reinforcing scrim. Certified R0 particle migration (< 100 particles > 10 µm/m³).

PPL Rigid Pocket Filter
ISO Coarse 70% • G4

Aerodynamic Rigid Pocket Filter PPL

Self-supporting aerodynamic synthetic pockets operating with low initial pressure drop (40 Pa at 3,400 m³/h). Ideal for heavy gas turbines and HVAC systems.

Laminar 48 Absolute HEPA
EN 1822 H13–H14 • MPPS

Laminar Flow Absolute HEPA Filter (48 mm)

Cleanroom ceiling terminal filter with mini-pleated micro-glass fiber media and hot-melt separators. 99.995% efficiency at MPPS.

V-Cell High Surface Area Filter
ISO ePM1 85% • F9 / 18 m²

High Surface Area V-Cell Filter (V-Bank)

Aerodynamic 3V/4V bank configuration with up to 18 m² active filtration area. Engineered for high volume flows up to 5,000 m³/h.

B2B Collaboration

Kimia Zist Tarmim Co.

Next-Generation Nanofibrous Wound Dressings

B2B Collaboration

Nano Tarpak Co.

Personal-Care & Controlled Drug-Release Cosmetic Pads

B2B Collaboration

Isfahan University of Technology (IUT)

Academic R&D & Nanofiber Testing Facilities

B2B Collaboration

Filtrair Partnership

Synthetic Ceiling Diffusion Media for Paint Booths

INTERNATIONAL CLASSIFICATION STANDARDS

Air Filtration & Suspended Matter Standards Matrix

Comprehensive cross-reference comparing legacy EN 779:2012, ASHRAE 52.2, modern ISO 16890 fractional PM ratings, and high-efficiency cleanroom HEPA/ULPA EN 1822 standards.

Group EN 779:2012 ASHRAE 52.2 Arrestance (Am %) Efficiency (Em %) Min. Eff. 0.4µm ISO 16890 ePM1 ISO 16890 ePM2.5 ISO 16890 ePM10 ISO Coarse Final ΔP (Pa)
COARSE G1 MERV 1 50 ≤ Am < 65 — — — — — — 250 Pa
COARSE G2 MERV 2-4 65 ≤ Am < 80 — — — — — > 30% 250 Pa
COARSE G3 MERV 5-6 80 ≤ Am < 90 — — — — — > 40% 250 Pa
COARSE G4 MERV 7-8 90 ≤ Am — — — — — > 60% 250 Pa
MEDIUM M5 MERV 9-10 — 40 ≤ Em < 60 — — — > 50% — 450 Pa
MEDIUM M6 MERV 11-12 — 60 ≤ Em < 80 — — 50-65% > 60% — 450 Pa
FINE F7 MERV 13 — 80 ≤ Em < 90 35% 50-65% 65-80% > 85% — 450 Pa
FINE F8 MERV 14 — 90 ≤ Em < 95 55% 65-80% > 80% > 90% — 450 Pa
FINE F9 MERV 15 — 95 ≤ Em 70% > 80% > 95% > 95% — 450 Pa

* Note: Since 2018, ISO 16890 fully supersedes EN 779:2012. Discharge treatment using IPA vapor is mandatory to evaluate uncharged electrostatic media.

TECHNICAL FAQ

Answers to Technical & Production Inquiries

Direct answers from our senior engineering team covering Roll-to-Roll capacities, coating weight control, and international certification.

Our facility operates 3 continuous industrial Roll-to-Roll electrospinning lines with a combined production speed of up to 200 m/h and roll substrate width of 60 cm.

Yes. Through our B2B service SRV-01, we apply functional nanofiber layers onto customer-supplied substrates (nonwovens, cellulose filter papers, reticulated foam, or fabrics) while controlling tension and coating weight.

Our continuous electrospinning platform produces controlled nanofiber diameters between 80 nm and 500 nm, verified via scanning electron microscopy (SEM) up to 10,000× magnification.

Our filtration models comply with ISO 16890 (Coarse, ePM10, ePM2.5, ePM1), EN 779:2012 (G2 to F9), EN 1822 (E10 to U17), ASHRAE 52.2, and DIN 53438-F1 flammability classifications.

Nanofiber veils achieve particulate interception through slip-flow mechanics. We engineer extremely thin, high-porosity functional layers with optimized coating weight so initial pressure drop increase is virtually negligible while sub-micron efficiency jumps dramatically.

You can click the 'Request Engineering Quote' button anywhere on our site to open our context-aware RFQ drawer, pre-filling your selected SKU or attaching technical drawings and process parameters.