Skip to main content
+98 912 322 0721 info@aryannano.com Tehran & Isfahan (IUT Campus)
AN
Nano Sazeh Aryan Nik & Vira Safi Roll-to-Roll Electrospinning & Cleanroom Air Filtration

Standards, Filtration Physics & Technical Knowledge Hub

In-depth engineering monographs on ISO 16890 fractional efficiency, EN 1822 MPPS testing, aerodynamic slip flow mechanics, and continuous Roll-to-Roll scale-up.

TECHNICAL MONOGRAPHS

Featured Filtration Science & Nanotechnology Articles

Authored by our R&D engineering team at Isfahan University of Technology (IUT).

Monograph 7 min read

Industrial Roll-to-Roll Electrospinning: Overcoming the Scale-Up Bottleneck

How multi-line Roll-to-Roll electrospinning with continuous solution preparation achieves 200 m/h output while maintaining 80–500 nm fiber diameter uniformity.

Verified Research
Monograph 9 min read

ISO 16890 vs. EN 779:2012: The Complete Engineering Transition Guide

Understanding the fractional efficiency classification across ePM1, ePM2.5, ePM10, and Coarse, replacing outdated 0.4 µm single-point ratings.

Verified Research
Monograph 6 min read

Nanofiber Functional Layers in Automotive & HVAC Filtration: Slip Flow Physics

How Knudsen number and Cunningham slip correction factor enable electrospun nanofiber veils to trap sub-micron soot without generating excessive pressure drop.

Verified Research
Monograph 8 min read

EN 1822 MPPS Testing & Validation for Cleanroom HEPA/ULPA Filters

Detailed walkthrough of Most Penetrating Particle Size (MPPS, 0.12–0.25 µm) scanning, oil thread test, and fractional penetration down to 0.000005%.

Verified Research
INTERNATIONAL CLASSIFICATION STANDARDS

Air Filtration & Suspended Matter Standards Matrix

Comprehensive cross-reference comparing legacy EN 779:2012, ASHRAE 52.2, modern ISO 16890 fractional PM ratings, and high-efficiency cleanroom HEPA/ULPA EN 1822 standards.

Group EN 779:2012 ASHRAE 52.2 Arrestance (Am %) Efficiency (Em %) Min. Eff. 0.4µm ISO 16890 ePM1 ISO 16890 ePM2.5 ISO 16890 ePM10 ISO Coarse Final ΔP (Pa)
COARSE G1 MERV 1 50 ≤ Am < 65 — — — — — — 250 Pa
COARSE G2 MERV 2-4 65 ≤ Am < 80 — — — — — > 30% 250 Pa
COARSE G3 MERV 5-6 80 ≤ Am < 90 — — — — — > 40% 250 Pa
COARSE G4 MERV 7-8 90 ≤ Am — — — — — > 60% 250 Pa
MEDIUM M5 MERV 9-10 — 40 ≤ Em < 60 — — — > 50% — 450 Pa
MEDIUM M6 MERV 11-12 — 60 ≤ Em < 80 — — 50-65% > 60% — 450 Pa
FINE F7 MERV 13 — 80 ≤ Em < 90 35% 50-65% 65-80% > 85% — 450 Pa
FINE F8 MERV 14 — 90 ≤ Em < 95 55% 65-80% > 80% > 90% — 450 Pa
FINE F9 MERV 15 — 95 ≤ Em 70% > 80% > 95% > 95% — 450 Pa

* Note: Since 2018, ISO 16890 fully supersedes EN 779:2012. Discharge treatment using IPA vapor is mandatory to evaluate uncharged electrostatic media.